Rebooting your Harmony remote is a simple process that can help resolve technical issues and refresh your experience. To begin, locate the Power button located beneath the battery cover on the back of the Harmony remote. Once found, press and hold the Power button for 15-20 seconds. The remote will then enter into its reboot cycle, indicated by a red light that will flash on the bottom of the remote. After the reboot is complete, the red light will turn off. The remote will now be reset and ready to use. If you experience any difficulties during the reboot process, please contact your local Harmony customer service team for assistance.
An alternative solution,
How to Reboot / Reset Harmony remote Ultimate / Touch / Elite
Moreover, How to reset Logitech Harmony 665 remote. Resetting the Logitech Harmony 665 Remote is a simple process that helps clear any settings that may have been changed, allowing you to restore the remote to its original factory settings. To reset the remote, simply press and hold both the Back and Home buttons at the same time until the Activity LED flashes twice. You will then need to enter the four-digit security code which is printed on the back of the remote, followed by the ‘#’ key. Once the code has been entered, the remote will automatically reset. In addition, it is important to note that the Harmony 665 remote must be connected to a computer to update or reset the remote. This can be done via the Logitech Harmony Software, which is available
Finally, How do I reconnect my Harmony remote?.
- Ensure the hub is powered. When first connecting it to a power source, wait 30 seconds.
- Press the Pair/Reset button on the back of the hub.
- Depending on your Harmony product, press the Menu and Mute buttons simultaneously on the Harmony Pro, Elite, and Smart Control remote controls.
Frequently Asked Question
Why is my Harmony remote not syncing?
Restart or reboot your Wi-Fi router, mobile device, and Harmony remote (and hub). Turn Bluetooth and Wi-Fi on and off (or toggle) for mobile devices. Ensure that the Harmony hub and mobile app are connected to the same Wi-Fi network.
Why is my Harmony app not working?
Ensure that the computer you are using is plugged into the internet. Verify that the minimum system requirements for Harmony are met by your computer or mobile device. Check, and if needed, update your Harmony software. Exit the Harmony desktop software, then re‑launch it.
How do I resync my Harmony remote?
- Launch the Harmony app and sign into your account.
- Select the sync icon in the upper right corner of your Harmony remote after choosing it. It might be necessary for you to USB-connect your remote to your computer.
- Select your remote language, followed by SYNC NOW.
How do I reset my Logitech Harmony remote?
For 20 seconds, simultaneously press and hold the Off button and the Menu button (which are located above the Channel Up button). The remote’s screen will briefly turn off before returning to showing a picture of a remote control and a circular arrow. Your remote will return to factory settings after a short while, at which point you can sync it once more.
How do I connect my Harmony remote to WiFi?
Open the Harmony app, then tap the bottom of the screen to choose Set Up New Hub. Make sure your hub is powered on and plugged in, then push the Pair/Reset button on the hub’s back. To complete connecting to your new Wi-Fi network, adhere to the on-screen instructions.
How do I sync my Harmony remote to my TV?
Launch the Harmony app and sign into your account. Select your Harmony remote, followed by DEVICES > ADD DEVICE. For the device you’re adding, enter the maker and model number. Finally, click SYNC NOW after selecting the sync icon in the settings menu’s upper right corner.
How long does it take to sync Harmony remote?
30 seconds will pass after the Harmony Hub is plugged into the computer before it is detected.
Why is Harmony not working?
Restarting your Harmony blaster often solves issues if Harmony stops sending commands or if the Harmony Express app is unable to find your blaster. Disconnect the power cable from your Harmony blaster, wait ten seconds, and then reconnect it to restart it. It will take about 30 seconds to power back on.
How do I reset my Harmony app?
For 20 seconds, simultaneously press and hold the Off button and the Menu button (which are located above the Channel Up button). The remote’s screen will briefly turn off before returning to showing a picture of a remote control and a circular arrow. Your remote will return to factory settings after a short while, at which point you can sync it once more.
Why is my Harmony Hub not working?
Try the following if Harmony Hub isn’t finding or connecting to your Wi-Fi network: Make sure your Wi-Fi password doesn’t contain an emoji because Harmony doesn’t support them. Plug the hub back into the power adapter after unplugging it and waiting ten seconds. The Hub will take 30 seconds to power on.
Are the Harmony servers down?
How do I reset my Harmony remote?
For 20 seconds, simultaneously press and hold the Off button and the Menu button (which are located above the Channel Up button). The remote’s screen will briefly turn off before returning to showing a picture of a remote control and a circular arrow. Your remote will return to factory settings after a short while, at which point you can sync it once more.
Why is my Harmony not working?
Make sure you’re using the most recent version of the Harmony mobile app available from the Apple Store or Google Play. Restart or reboot your Wi-Fi router, mobile device, and Harmony remote (and hub). Turn Bluetooth and Wi-Fi on and off (or toggle) for mobile devices.
Do I need to update my Harmony remote?
By updating your remote’s firmware, you can get the newest functionality, fixes, and security updates. Please refer to our Harmony release notes to see what is included in each of our updates.
How do I unpair my Harmony remote from my hub?
If you need assistance to unpair a remote or Hub, take the following actions:
- Scroll down to “Others” in the Advanced Tools Menu and click the “Unpair” button.
- USB-connect your remote (or Hub) to your computer.
- Click “Unpair All” after the tool has detected your remote or Hub.
How do I put my Harmony remote in pairing mode?
- Ensure the hub is powered. When first connecting it to a power source, wait 30 seconds.
- Press the Pair/Reset button on the back of the hub.
- Depending on your Harmony product, press the Menu and Mute buttons simultaneously on the Harmony Pro, Elite, and Smart Control remote controls.