What Is Anti-Dither

Antidither is the amount of delay that will occur before the DVR starts recording, it can also be thought of as the amount of time something in the image has to be there to trigger the DVR to record. Masking is blocking of certain sections in the image to turn off the motion detection of that part of the image.Aug 19, 2017

What is anti-dither Lorex?, Antidither: After an initial motion event, the system will continue to record video if a second motion event occurs within the set Antidither period. … Latch: Determines how long an alarm output device (not included – sold separately) will remain active after motion is detected.

Furthermore, What is record delay?, Delay: Pretty much like the “Anti-Dither” setting, this tells the DVR to continue recording for a certain amount of time after motion has ended. The minimum value is set at 10 seconds but can be adjusted higher if you desire.

Finally,  What is camera masking?, Privacy Masking is a feature on some security cameras that allows you to blur or completely block certain areas seen on the cctv monitor within the field of view of the camera. You may need to do this in order to protect sensitive material from being shown but not at the expense of losing valuable surveillance footage.

Frequently Asked Question:

How do I change the sensitivity on my Lorex camera?

To adjust threshold or sensitivity:

  1. Right-click on the Live View to access the Quick Menu toolbar.
  2. Click Main Menu and then click the Setting icon ( ).
  3. Click Event > Motion.
  4. Click the Motion Detect tab.
  5. Click Channel and select the camera to be configured.

How do I adjust the sensitivity on my security camera?

Motion Detection Sensitivity Settings

  1. On your DVR, navigate to MENU > SYSTEM SETUP > CAMERA > MOTION SENSOR.
  2. Click on the SENSITIVITY LEVEL for the camera you would like to adjust.
  3. You will now see the following pop up window.

What is threshold setting on security camera?

Sensitivity and Threshold are settings found on the motion detection section of security camera systems. … Threshold determines how much motion is required to trigger an event. If the amount of motion exceeds the threshold, an event occurs. It is recommended to select a Threshold between 10~50.

What is sensitivity in motion detection?

Sensitivity determines how drastic a change in the view of the camera must be to trigger a clip. For example, a cloud moving slowly across the screen may trigger a video clip if the sensitivity is set high enough, whereas a lower sensitivity may not trigger a recording for the same amount of motion.

What is video mask on security camera?

A video mask is used to exclude sensitive parts from your camera’s vision. This can be helpful in preventing false alerts from the motion sensor (eg.

What does video masking mean?

What is masking? Masking is a tool in post that allows you to target effects to a specific area or section of your video clip. It also allows you to cut out something or even place something on top of your video. That means, if you want to combine two clips into one, you can. You just have to mask the videos.

What are privacy masks?

Privacy masking (explained)

You can use privacy masking to protect private or public areas in live and recorded video by blocking out certain areas in the field of view of a camera.

Why is recording delayed?

The reason for the delay is that her voice is being piped right from the mic and out through the headphone amp on the audio interface entirely on a hardware level, but the instrumental is traveling from the DAW software through the digital-to-analog converter in the interface and then out through the headphones.

What is recording delay logic?

When recording audio or playing a software instrument in Logic Pro, you might experience a slight delay between playing or singing a note and when you hear the sound from your speakers or headphones. This delay is called input monitoring latency.

How do you fix recording delays?

5 Tips For Reducing Recording Latency

  1. Hit Those Buffers. The audio buffer is the small, continually active virtual space that your computer uses to store audio in the time between receiving it, passing it to software and back out again so you can hear it. …
  2. Change Buffers At Different Stages. …
  3. Freeze Tracks. …
  4. Use Direct Monitoring. …
  5. Keep Drivers Updated.

How do I fix recording delay in logic?

Sounds like you accidentally changed the “recording delay” slider (it’s set in milliseconds). Go into preferences and make sure it’s 0. That should solve your problem.

How do I adjust the sensitivity on my Lorex camera?

To adjust threshold or sensitivity:

  1. Right-click on the Live View to access the Quick Menu toolbar.
  2. Click Main Menu and then click the Setting icon ( ).
  3. Click Event > Motion.
  4. Click the Motion Detect tab.
  5. Click Channel and select the camera to be configured.

What is Lorex Capture mode?

Lorex NVRs are compatible with digital IP security cameras. In this type of system, video is captured and encoded by the IP camera itself. The video is then transmitted to the NVR over a standard CAT5e or CAT6 ethernet cable with RJ45 plug.

What is threshold setting on security camera?

Sensitivity and Threshold are settings found on the motion detection section of security camera systems. … Threshold determines how much motion is required to trigger an event. If the amount of motion exceeds the threshold, an event occurs. It is recommended to select a Threshold between 10~50.

What is sensitivity in motion detection?

Sensitivity determines how drastic a change in the view of the camera must be to trigger a clip. For example, a cloud moving slowly across the screen may trigger a video clip if the sensitivity is set high enough, whereas a lower sensitivity may not trigger a recording for the same amount of motion.

What does motion sensitivity mean?

The motion sensor is more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera. The motion sensitivity settings range from one (low sensitivity) to 100 (high sensitivity).

What is sensitivity and threshold?

Sensitivity determines how sensitive the camera is to motion. For example, if the sensitivity is high, small amounts of motion are more likely to trigger an event. … Threshold determines how much motion is required to trigger an event. If the amount of motion exceeds the threshold, an event occurs.

Related Posts